23
-EN
Operations
You can use the supplied remote commander to
operate the TV and Sony video equipment, such as a
VCR or multi-disc player. To operate Sony video
equipment, first set the remote command mode for the
video equipment you want to use.
1
Press and hold the POWER button in the
VCR control area.
2
Press the number buttons that correspond
to the remote command mode.
POWER
1
2
3
4
6
7
8
9
0
5
Setting the remote
command mode
Mode number
buttons
0 and then 1
0 and then 2
0 and then 3
0 and then 4
Remote command mode
VTR1 (e.g., Beta format VCR)
VTR2 (e.g., 8 mm format VCR)
VTR3 (e.g., VHS format VCR)
MDP (multi-disc player)
After setting the remote command mode, you can
use the following buttons to operate the video
equipment.
Operation buttons for
video equipment
1
2
Improving TV signal
If the reception signal is very strong, you can attenuate
it to obtain better picture reception.
1
Display the MANUAL PROGR menu. (Follow
steps 1 to 3 in “Presetting channels
manually” on page 21.)
2
Press
¢
+ or
›
– to move the cursor (
z
) to
PR, and press ENTER.
3
Press
¢
+ or
›
– to select the program
position corresponding to the channel
whose signal is very strong, and press
ENTER.
4
Press
¢
+ or
›
– to move the cursor (
z
) to
ATT, and press ENTER.
5
Press
¢
+ or
›
– to select ON, and press
ENTER.
