– 39 –
KP-51DS1U
RM-892
6-2. PAL REGISTRATION ADJUSTMENT
6-2-1. Registration Adjustment Method
1. Turn on the main power switch of the set and enter into
standby mode.
2. Press the following sequence of buttons on the Remote
Commander.
CENTER ADJUSTMENT
1. Adjust H Position and V Position.
3. Press “MENU” on the commander.
4. Move to the corresponding adjustment using the joystick
( or : up or down) on the commander.
5. Move the joystick to the right ( ) to enter the selected
adjustment.
With the joystick
:
or
Items change
or
Data change
In internal pattern :
ITEM : Convergence
OSD CHSW = “00” Internal pattern (crosshatch)
OSD CHSW = “01” External pattern
Color of internal pattern :
ITEM : Convergence
GH GSEL = “00”
Green + Red
GH GSEL = “01”
Green
BH BSEL = “00”
Blue + Green
BH BSEL = “01”
Blue + Red
6-2-2. Geometry Adjustment
1. Receive the PAL SPCB signal.
2. Select wide mode.
Press “
(blue key)” : Wide
b
Smart
b
4 : 3
b
Zoom
Need geometry adjustment to wide mode, smart mode and
zoom mode. Production spec of each mode.
∗
4 : 3 mode no adjust. (except for H Position)
3. Select service mode and enter adjustment item for green sig-
nal.
Enter the
“TT MODE”
5
(DIGIT 5)
()
(TV MODE)
ON SCREEN
DISPLAY
( )
Signal : SPCB PAL
H SIZE
V SIZE
Wide
16.6 ±0.15 sq
12.4 ±0.15 sq
Smart
17.0 ±0.15 sq
11.4 ±0.15 sq
Zoom
16.65 ±0.15 sq
9.3 ±0.15 sq
H Position
V Position
SIZE ADJUSTMENT
1. Make Convergence GH SIZE data “00”.
2. Adjust Geometry H Size.
3. Make Convergence GV SIZE data “00”.
4. Adjust Geometry V Size.
5. Adjust Geometry S Correction.
V Size
H Size
