– 25 –
KP-43T75C/53SV75C/61SV75C
RM-Y906
RM-Y906
RM-Y906
SECTION 2
DISASSEMBLY
2-1. REAR BOARD REMOVAL
2-3. SERVICE POSITION
2-2. CHASSIS ASSY REMOVAL
2-4. HA BOARD AND HB BOARD REMOVAL
(EXCEPT KP-43T75C)
2
Rear board
1
Nine screws (Except KP-43T75C)
Eight screws (KP-43T75C)
(Screw(4x20), tapping)
1
Three screws
(Screw(4x20),tapping)
2
Chassis assy
1
Disconnect CN203
on A board.
From CG board CN1304.
(The extension cable is not
supplied because of the
countermeasure for radiation.)
G board
CN203
A board
2
Covers
Cut them off with a plier or the like
from chassis assembly in case of
checking printed circuit boards.
After checking, turn over the covers
and secure them with screws.
Screws
(+BVTP3x12)
Chassis assembly
8
Three screws
(+BVTP 3x12)
6
Four screws
(+BVTP 4x12)
2
Two screws
(+BVTP 4x12)
1
Two screws
(Screws (4x20), tapping)
9
HB board
7
HB bracket
Speaker grille assy
5
HA board
3
HA bracket
4
Multi button