31
GB
F:\SONY STM\Sony STM 2009 Jobs\Grp S1\JC090195_4135850121 Grp
S1 GB Rev 2\4135850121\080MEN.fm
masterpage:Left
KLV-52/46/40/32V550A/40/32V530A/40S550A
4-135-850-
12
(1)
Us
in
g Men
u
Fu
nc
tio
n
s
Favourite Set-up
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select “– – –”.
Auto Tuning
Tunes in all the available channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Programme Sorting
Changes the order of channels stored in the TV.
1
Press
F
/
f
to select the channel you want to move to a new position, then press
.
2
Press
F
/
f
to select the new position for the channel, then press
.
Programme Labels
Assigns a channel name of your choice, up to five letters or numbers. The name
appears briefly on the screen when you select the channel. Names for channels are
usually taken automatically from Text (if available).
1
Press
F
/
f
to select the channel you want to name, then press
.
2
Press
F
/
f
to select the desired letter or number (“_” for a blank space), then
press
g
.
If you enter a wrong character
Press
G
/
g
to select the wrong character. Then, press
F
/
f
to select the correct
character.
3
Repeat step 2 until you finish entering the name.
4
Press
to exit the labeling procedure.
Programme Block
Blocks an individual channel from being watched.
1
Press
F
/
f
to select the channel you want to block, then press
.
2
Press
F
/
f
to select “Block”, then press
.
To watch the channel, select “Allow”.
Intelligent Picture
On with Indicator
Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On
Automatically reduces the picture noise.
Off
Turns off the “Intelligent Picture” feature.
Manual Programme
Preset
To preset a channel, press
PROG +/–
to select the programme number, before
selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Signal Booster” or “Colour
System”. You cannot select a programme number that is set to “Skip” (page 32).
Programme/
TV System/
Frequency
Presets programme channels manually.
1
Press
F
/
f
to select “Programme”, then press
.
2
Press
F
/
f
to select the programme number you want to
manually tune (if tuning a VCR, select programme 0),
then press
.
3
Press
F
/
f
to select “TV System”, then press
.
4
Press
F
/
f
to select the best received TV broadcast
systems, then press
.
5
Press
F
/
f
to select “Frequency”, then press
.
6
Press
G
/
g
to search for the next available channel. The
frequency band (“VHF Low”, “VHF High” or “UHF”)
is changed accordingly.
Label
Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in “Programme
Labels” (page 31).
(Continued)
