33
Setup
Notes on Using This Connection
Do not leave the display indication of the cable box and VCR
turned on.
Rear of Media receiver unit
Cable box
AUDIO
OUT
SUBWOOFER
OUT
1
VIDEO IN
R–AUDIO–L
R–AUDIO–L
VIDEO
S VIDEO
3
VHF/UHF
AUX
TO
CONVERTER
(VAR/FIX)
(VAR)
6
DISPLAY SIGNAL OUT
DVI–HDTV IN
WHITE
DVI–HDTV
BLACK
R–AUDIO–L
VCR
CATV
cable
Coaxial cable
Antenna cable
(supplied)
Splitter
(not supplied)
A/V cable
Cable box
To Do This ...
Do This ...
Watch cable (unscrambled)
channels
Press
TV/VIDEO
repeatedly to select the cable input (UHF/VHF in the illustration).
Watch cable box (scrambled)
channels
Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
or 4). Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration). Use the cable box to change channels.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the illustration).
Set up the TV remote control to
operate the cable box or VCR
If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on page 54.
Activate the remote control to
operate the cable box or VCR
For the cable box, press
FUNCTION
repeatedly until the
SAT/CABLE
indicator
lights up. For the VCR, press
FUNCTION
repeatedly until the
DVD/VCR
indicator
lights up.
Control specific cable box and
VCR functions with the TV
remote control
See “Operating a Cable Box” on page 57 and “Operating a VCR” on page 56.
Label video inputs to easily
identify equipment connected to
the TV
See the instructions for setting up Video Labels on page 90.
