28
Setup
To connect the cable box
1
Connect the CATV cable to the cable box’s input jack.
2
Use the supplied antenna cable to connect the cable box’s output jack to
the TV’s VHF/UHF jack.
3
Run the Auto Setup program, as described in “Setting Up the Channel
List” on page 49.
Notes on Using This Connection
Do not leave the display indication of the cable box turned on.
VHF/UHF
Antenna cable
(supplied)
OUT
IN
Cable box
CATV
cable
To Do This ...
Do This ...
Use the cable box
Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then
use the cable box to switch channels.
Set up the TV remote control to
operate the cable box
Program the remote control. See “Programming the Remote Control” on page 54.
Activate the remote control to
operate the cable box
Press
FUNCTION
repeatedly until the
SAT/CABLE
indicator lights up.
Prevent the accidental switching
of TV channels
When using the cable box, you need the TV to stay on the channel the cable box is
set to (usually channel 3 or 4). You can use the TV’s Channel Fix feature to lock in a
specific channel. For details, see “Using the Channel Menu” on page 84.
