Sony KE-42MR1E Operating Instructions Manual Download Page 24

Page: 24 / 72

First TIme Operation

Your Plasma TV is now ready for use.

The Clock Set menu appears on the TV screen.

Press

to set the hour, then press

Press

to set the minutes, then press

Press

to set the day of a week, then

press OK at the time signal.
The clock starts.

If you adjust the clock, Auto Tuning should
always be performed next.

The Auto Tuning menu appears on the screen.
Press OK to select Yes.

The Plasma TV automatically starts searching and
storing all available broadcast channels for you.

This procedure could take some minutes. Please
be patient and do not press any buttons,
otherwise automatic tuning will not be
completed.

If no channels are found during the auto tuning
process, a new menu appears automatically on
the screen asking you to connect the antenna.
Please connect the antenna (see page 22) and
press OK. The auto tuning process will start
again.

Press MENU to turn off the menu.

Clock Set

0 0 : 0 0 :

0 0

Mon

Do you want to start

automatic tuning ?

Yes

Auto Tuning

Program :
System :
Channel :

Searching...

01
D/K
VHS

No channel found.

Please connect antenna

Confirm

MENU

Summary of Contents for KE-42MR1E









































































Search results

Summary of Contents for KE-42MR1E

Reviews:

Related manuals for KE-42MR1E

Brands by name

Popular brands

Sony KE-42MR1E, Operating Instructions Manual

Search results

Summary of Contents for KE-42MR1E

Reviews:

Related manuals for KE-42MR1E

Brands by name

Popular brands