17
KDL-52V4100/52W4100
KDL-52V4100/52W4100
1-8. SPEAKERS, UNDER BAR, H3E BOARD, H4 BOARD, AND LIGHT GUIDE REMOVAL
1 Slide out Speaker (L) unit from Bezel
2 Slide out Speaker (R) unit from Bezel
3 Remove 2 screws from Under Bar
4 Disconnect 1 connector and Slide out H3E Board from Clear Panel
5 Release hooks and remove from Bezel
6 Remove 1screw and Release hooks from Clear Panel
7 Disconnect 1 connector and Slide out H4 Board from Light Guide
8 Disconnect 1 connector and
Remove Illumination Module from Bezel. (KDL-52W4100 ONLY)
Bezel
LCD Panel
1
2
1-9. LCD
PANEL
REMOVAL
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration on Page 32 for KDL-52V4100
models or Page 50 for KDL-52W4100 models.
1 Disconnect 3 connectors
2 Remove 2 screws
Speaker Unit (L)
Speaker Unit (R)
Illumination
Module
Light Guide
Under Bar
H3E Board
H4 Board
Bezel
Clear Panel
3
1
2
5
4
6
7
8
