– 9 –
SE-1
RM-ED007
3
Press
F
/
f
to select the language
displayed on the menu screens, then press
.
4
Press
F
/
f
to select the country/region in
which you will operate the TV, then press
.
If the country/region in which you want to use the
TV does not appear in the list, select “-” instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to “6: Auto-tuning
the TV”.
6: Auto-tuning the TV
After selecting the language and country/region, a
message confirming the TV start auto-tuning appears
on the screen.
The TV will now search for and store all available TV
channels.
1
Press .
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connections
No digital or analogue channels were found.
Check all the aerial connections and press
to
start auto-tuning again.
2
When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 20).
If you do not wish to change the order in which the
analogue channels are stored on the TV, go to step
3.
3
Press MENU to exit.
The TV has now tuned in all the available
channels.
A
uto
Start
Up
Language
C
ountry
Select
:
C
onfirm
:
A
uto
Start
Up
Language
C
ountry
Select
:
C
onfirm
:
1
3
Bac
k:
Start
:
C
ancel
:
MENU
Overview of the TV
buttons and indicators
1
MENU (page 16)
2
/
– Input select/OK
• In TV mode (page 23): Selects the input source
from equipment connected to the TV sockets.
• In TV menu: Selects the menu or option, and
confirm the setting.
3
2
+/-/
G
/
g
• Increases (+) or decreases (-) the volume.
• In TV menu: Moves through the options left (
G
)
or right (
g
).
4
PROG +/-/
F
/
f
• In TV mode: Selects the next (+) or previous (-)
channel.
• In TV menu: Moves through the options up (
F
) or
down (
f
).
5
1
– Power
Switches the TV on or off.
Note:
To disconnect the TV completely, pull the plug from
the mains.
6
– Picture Off/Timer indicator
• Lights up in green when the picture is switched off
(page 19).
• Lights up in orange when the timer is set
(page 20).
• Lights up in red when digital REC starts in standby
mode.
7
1
– Standby indicator
Lights up in red when the TV is in standby mode.
8
"
– Power indicator
Lights up in green when the TV is switched on.
9
Remote control sensor
Watching TV
1
Press
1
on the TV (top side) to switch on
the TV.
When the TV is in standby mode (the
1
(standby)
indicator on the TV (front) is red), press
"/1
on
the remote to switch on the TV.
2
Press DIGIT
A
L to switch to digital mode or
A
N
A
LOG to switch to analogue mode.
The channels available vary depending on the
mode.
3
Press the number buttons or PROG +/- to
select a TV channel.
Watching TV
3
1
2
2
3
1
