7
GB
Location and Functions of Parts and Controls
O
v
er
vi
ew
4
PC card slot
Insert the recommended ATA memory
card (“Memory Stick” in the PC card
adaptor) into each slot.
Insert the PC card with its front side (
B
mark) downward. Make sure that the PC
card is fully pushed in.
5
Lid
Pull to remove the lid. To replace, push
it in fully to the end.
6
POWER indicator (green)
When the power is supplied to the
camera, the camera starts checking the
system. If the system is normal, this
indicator lights up.
If a system error occurs, this indicator
flashes every second. In this case,
consult your authorized Sony dealer.
7
Tripod adapter
Use this adapter when attaching the
camera to a tripod (screw: 1/4”, 20
UNC)
The following mounting screw can be
used.
Use the mounting screw whose length is
4.5 mm ± 0.2 mm only. Use of other
screws may cause improper mounting
and damage parts inside the camera.
8
WIDE button
Press this button to zoom in.
To reverse the image, press the WIDE
button and TELE button simultaneously
for more than 1 second.
9
TELE (telephoto) button
Press this button to zoom out.
To reverse the image, press the WIDE
button and TELE button simultaneously
for more than 1 second.
q;
T
(video output) connector
(BNC type)
Outputs a composite video signal.
Connect to a composite video input
connector of a video monitor, VCR, etc.
qa
DC 12 V/AC 24 V (power input)
terminal
Connect to a 12V DC or 24V AC power
supply system.
Note
B
mark
U1/4”, 20 UNC
= 4.5 mm ± 0.2 mm
(ISO standard)
Caution
ZOOM
2
1
+
–
DC 12V
TELE
WIDE
1
2
3
4
5
6
7
8
9
10
AC 24V
8
9
0
qa
qf
qg
qh
qs
qd
Rear
