Sony IPELA SNC-CS10, Service Manual

Page: 16 / 56

2-4
SNC-CS10/CS11
3. Turn the power of this unit off and on again.
The monitor is displayed and the Network LED
flashes.
4. Start up the web browser on PC.
n
Set the proxy setting of the web browser to “No
proxy”.
5. Access the following URL using the Web browser to
display the welcome page.
http://192.168.0.100
6. Click the
[Setting]
button.
12 LINE
12 LINE
14 PIXELS
28 PIXELS 28 PIXELS
58 PIXELS 58 PIXELS
142 PIXELS 142 PIXELS
ZONE 0
ZONE
ZONE
ZONE ’
ZONE
142 PIXELS
16 LINE
16 LINE
24 LINE
24 LINE
72 LINE
72 LINE
248 LINE
14 PIXELS
7. Click the “Camera” tab on the Setting menu, then click
the “Picture” tab.
8. Set “Gain up” to 0 dB.
9. Click the
[OK]
button.
10. Set the lens iris to 65IRE.
11. Shoot a clear chart using this unit.
12 Check that the black spot appears on the monitor and
adjust so that the following specification is satisfied.
n
If the specification is not satisfied, replace the camera
block.