A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network Menu
53
MAC address
Displays the MAC address of the wireless card inserted
in to the CF card slot.
If a wireless card is not inserted, “00:00:00:00:00:00”
will be displayed.
IPv4 setting
Configure the IPv4 network setting.
IP address
Configure the IP address for a wireless network.
Obtain an IP address automatically (DHCP):
Select
this option when a DHCP server is installed on the
network to allow IP address assignment. With this
setting, the IP address is assigned automatically.
Use the following IP address:
Select this option when
you set a fixed IP address. With this setting, specify
the
IP address
,
Subnet mask
and
Default gateway
manually.
Note
When you select
Obtain an IP address automatically
(DHCP)
, make sure that a DHCP server is operating on
the network.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
DNS server
Configure the DNS server address.
Obtain DNS server address automatically:
Select this
option to obtain the address of the DNS server
automatically. This can be set only when
Obtain an
IP address automatically (DHCP)
is selected in the
Wireless tab.
Use the following DNS server address:
Select this
option when you set a fixed address as the IP address
of the DNS server. With this setting, specify the
addresses on
Primary DNS server
and
Secondary
DNS server
manually.
Note
When you select
Obtain DNS server address
automatically
, make sure that a DHCP server is
operating on the network.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server, if
necessary.
MTU
Enter the MTU value for wireless network. (1000 -1500)
If IPv6 is enabled, the value must be 1280 or greater.
Host name
Type the wireless network host name of the camera to be
transmitted to the DHCP server. This setting is valid
only when
Obtain an IP address automatically
(DHCP)
is selected in the Wireless tab.
Domain suffix
Type the wireless network domain suffix of the camera
to be transmitted to the DHCP server. This setting is
valid only when
Obtain an IP address automatically
(DHCP)
is selected in the Wireless tab.
Note
The domain suffix is sent to the DHCP server as FQDN
(Fully Qualified Domain Name) information when
Host
name
is set.
IPv6 setting
Configure the IPv6 network settings.
IPv6 can be used simultaneously with IPv4.
Only IPv6-specific details are explained here. For
common details, see “IPv4 setting” on page 53.
On/Off
To use IPv6, select
On
.
Prefix
Enter the Prefix value. (0 to 128)
IPv6 MTU
Enter the MTU value for IPv6. (1280 - 1500)
The value must not exceed the MTU value for the
wireless network.
Common setting
Type
Select the network connection type.
Ad hoc mode:
Select this when connecting to a
computer directly. With this setting, specify a
wireless channel.
Infrastructure mode:
Select this when connecting to a
computer via an access point or wireless router.
