A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera Menu
46
Click
Schedule
to display the setting menu for the
effective period. (“Setting the Schedule — Schedule
Menu” on page 92)
Sensor input:
Controls the day/night mode by
synchronizing it with the sensor input.
While a sensor input is detected, the camera works in
night mode.
Easy Focus
When
Sync with Day/Night
is selected, Easy Focus will
be activated once Day/Night mode switched, and the
focus readjusted automatically.
For details on Easy Focus, refer to the “Focus tab —
Adjusting the Focus (SNC-CH240/CH135/CH140
only)” (page 42) and “Focus/Zoom tab — Adjusting the
focus/zoom (SNC-CH180/CH280/DH140/DH180/
DH240/DH280 only)” (page 42).
Notes
• When using Easy Focus, satisfactory focus may not be
achieved.
• When using Easy Focus, the alarm of motion detection
is deactivated.
• When using Day/Night link, confirm the focus
condition under both Day and Night mode.
IR illuminator (SNC-CH180/DH180/CH280/
DH280)
Sync with Day/Night:
IR illuminator will be activated
once Day/Night mode switched, when it is checked.
off:
IR illuminator will be always off.
Maximum Strength:
From low to high, Maximum
strength for IR illuminator is graded from level1 to
level6.
OK/Cancel
See “Buttons common to every menu” on page 33.
Video codec Tab
Use this tab to set the items for the video codec.
Letterbox
If you use Letterbox, select
On
.
Note
This function is not available if SolidPTZ or Cropping is
set to
On
.
Solid PTZ
Select
On
to enable the solid PTZ.
Note
This function is not available if Letterbox or Cropping is
set to
On
.
Cropping
You can crop a portion of the image and display the
cropped image on the computer. Cropping reduces the
transmitting data size and thus the network load, and a
higher frame rate is achieved.
Select
On
to crop the image, or
Off
.
Notes
• This function is not available if Letterbox or SolidPTZ
is set to
On
.
• If this function is enabled, the motion detection
function will not be available.
To crop an image
1
Set
Cropping
to
On
and click the
Area setting
button.
The area setting window appears.
