177
Connection Examples of a Multipoint Connection
Chapt
er 6: Mul
tipoi
nt
Con
nect
ion
To connect with a normal phone
When you are using an ISDN connection, a normal phone can be connected at
up to three points.
Only the 1B (64K) connection is available for a normal phone.
• When using the ISDN connection, installing the PCSA-MCG80 HD MCU software
in two or more Communication Systems does not allow cascade connection.
• For multipoint connection, only the Communication System with the PCSA-MCG80
HD MCU software installed can be used as main terminal. If you want to use two or
more Communication Systems as main terminals depending on the type of
connection, the same number of HD MCU software installations as that of main
terminals is required.
Installing the PCSA-MCG80 HD MCU software in one Visual
Communication System enables a multipoint connection with the terminals
connected via a LAN and ISDN.
Using both LAN and ISDN connection
allows you to make a multipoint connection with up to four points.
Notes
Using Both LAN and ISDN
/
/
/
/
The illustration shows an example
using the PCSA-B768S ISDN Unit.
to
(100BASE-TX/
10BASE-T)
PCSA-B384S or PCSA-
B768S ISDN Unit
to ISDN1 to 6
ISDN modular cables
(not supplied)
to ISDN lines
UTP cable (category 5,
straight) (not supplied)
to LAN
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
