Sony ICD-UX523 Operating Instructions Manual Download Page 6

Page: 6 / 140

ModelName: ICD-UX522/UX522F/UX523/UX523F

PartNumber: 4-293-033-12

Disposal of waste batteries (applicable

in the European Union and other

European countries with separate

collection systems)

This symbol on the battery

or on the packaging

indicates that the battery

provided with this product

shall not be treated as household

waste.

On certain batteries this symbol

might be used in combination with a

chemical symbol. The chemical

symbols for mercury (Hg) or lead

(Pb) are added if the battery contains

more than 0.0005% mercury or

0.004% lead.

By ensuring these batteries are

disposed of correctly, you will help

prevent potentially negative

consequences for the environment

and human health which could

otherwise be caused by inappropriate

waste handling of the battery. The

recycling of the materials will help to

conserve natural resources.

In case of products that for safety,

performance or data integrity reasons

require a permanent connection with

an incorporated battery, this battery

should be replaced by qualified

service staff only.

To ensure that the battery will be

treated properly, hand over the

product at end-of-life to the

applicable collection point for the

recycling of electrical and electronic

equipment.

For all other batteries, please view the

section on how to remove the battery

from the product safely. Hand the

battery over to the applicable

collection point for the recycling of

waste batteries.

For more detailed information about

recycling of this product or battery,

please contact your local Civic Office,

your household waste disposal service

or the shop where you purchased the

product.

Notice for the customers: the following

information is only applicable to

equipment sold in the countries

applying EU directives

The manufacturer of this product is

Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan.

The Authorized Representative for

EMC and product safety is Sony

Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart, Germany.

For any service or guarantee matters

please refer to the addresses given in

separate service or guarantee

documents.

To prevent possible hearing

damage, do not listen at

high volume levels for long

periods.

Summary of Contents for ICD-UX523













































































































































Search results

Summary of Contents for ICD-UX523

Reviews:

Related manuals for ICD-UX523

Brands by name

Popular brands

Sony ICD-UX523, Operating Instructions Manual

Search results

Summary of Contents for ICD-UX523

Reviews:

Related manuals for ICD-UX523

Brands by name

Popular brands