Sony ICD-UX523 Operating Instructions Manual Download Page 126

Page: 126 / 140

ModelName: ICD-UX522/UX522F/UX523/UX523F

PartNumber: 4-293-033-12

Troubleshooting

Clock

“--:--” is displayed.



You have not set the clock (



p. 23).

“--y--m--d” or “--:--” is displayed on the REC Date display.



The date of recording will not be displayed if you recorded the file when the clock

was not set.

Display

There are fewer menu items displayed in the menu mode.



During playback, recording, or FM reception (ICD-UX522F/UX523F only) modes,

there are menu items that are not displayed (



p. 79).

The remaining time displayed in the display window is shorter than that

displayed in the supplied Sound Organizer software.



The IC recorder requires a certain amount of memory for system operation. That

amount is subtracted from the remaining time, which is the reason for the

difference.

Files

The “Memory Full” animation is displayed and you cannot start recording.



The memory is full.



Erase some of the files (



p. 57) or erase all the files after you store them on the

other memory media or on your computer.

The “File Full” animation is displayed and you cannot operate the IC recorder.



199 files have been recorded in the selected folder (

) or 4,074 files (when there

are 21 folders) in total have been recorded. Therefore you cannot record another

file, or move a file.



Erase some of the files (



p. 57) or erase all the files after you store them on the

other memory media or on your computer.

The memory card is not recognized.



Remove a memory card and check the side of the memory card. Then insert it with

correct side and direction (



p. 20).



Switch the memory media of the IC recorder to “Memory Card” (



p. 29).

Continued



Summary of Contents for ICD-UX523













































































































































Search results

Summary of Contents for ICD-UX523

Reviews:

Related manuals for ICD-UX523

Brands by name

Popular brands

Sony ICD-UX523, Operating Instructions Manual

Search results

Summary of Contents for ICD-UX523

Reviews:

Related manuals for ICD-UX523

Brands by name

Popular brands