Sony ICD-SX1000, Help Manual

Page: 314 / 318

Help Guide
How to Use
Troubleshooting
IC recorder operations
Software operations (Sound
Organizer)
Messages
System limitations
List of Topics
Print
IC Recorder
ICD-SX733/SX734/SX1000
Messages list
Follow the instructions below if a message appears on the display.
HOLD. Slide HOLD Switch to Activate.
All the button operations are disabled because the IC recorder is in the HOLD
status to prevent unintentional operations. Slide the POWER ON/OFF•HOLD switch
towards the center to release the IC recorder from the HOLD status.
(See “
Releasing the HOLD function .”)
Low Battery Level
You cannot format the memory or erase all the files in a folder because of
insufficient battery power. Charge the rechargeable battery.
(See “
Recharging the battery .”)
Charge Battery
The battery is exhausted. Charge the rechargeable battery.
(See “
Recharging the battery .”)
Low Battery to Update
The software update cannot be done because of the insufficient battery power.
Charge the rechargeable battery.
(See “
Recharging the battery .”)
Memory Card Error
An error occurred while a memory card was being inserted into the memory card
slot. Remove and try inserting it again. If this message persists, use a new
memory card.
Memory Card Not Supported
A memory card that the IC recorder does not support is inserted.
(See “
About compatible memory cards .”)
Memory Card Locked
The memory card is write-protected. A write-protected memory card cannot be
used with the IC recorder.
Read Only Memory Card
A read-only memory card is inserted. A read-only memory card cannot be used
with the IC recorder.
Memory Card Access Denied
Since a memory card containing an access control function is inserted, you cannot
use it.
Memory Full
The remaining memory capacity of the IC recorder is insufficient so that you
cannot record or copy a file. Erase some files before recording.
(See “
Erasing a file .”)
Back Back to Top
306
Search