IC Recorder
ICD-SX733/SX734/SX1000
Releasing the HOLD function
If you operate buttons on the IC recorder when the HOLD function is set, “HOLD.
Slide HOLD Switch to Activate.” appears on the display.
Release the HOLD function when you operate the IC recorder.
1. Slide the POWER ON/OFF•HOLD switch towards the center.
Note
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
Related Topic
Preventing unintentional operations (HOLD)
4-447-269-14(1)
© 2013 Sony Corporation
117
Search