IC Recorder
ICD-PX370
Recording automatically in response to the input sound volume – the VOR
function
You can set your IC recorder to automatically start when the input sound volume reaches the predefined level, and pause when
the volume decreases below the level.
When the input sound volume decreases below the predefined level, flashing
appears and the recording pauses.
When the volume reaches the level once again, the recording restarts.
Note
The VOR function is affected by the ambient sound conditions. Select the sensitivity level of the built-in microphone suitable to your ambient sound
conditions. For instructions on selecting the sensitivity level, see
Selecting the sensitivity level of the built-in microphone (Built-In Mic Sensitivity)
.
If the selected sensitivity level does not work as you expected or when you want make an important recording, follow the above steps to set “VOR”
to “OFF.”
Hint
To cancel the VOR function setup process, set “VOR” to “OFF” in step 2.
Select “
Settings” - “Recording Settings” - “VOR” from the HOME menu, and then press
.
1
Press or to select “ON,” and then press
.
“VOR” is set to “OFF” by default.
2
Press REC/PAUSE.
appears on the display window.
3
46
Summary of Contents for ICD-PX370
