Sony ICD-PX333, Help Manual

Page: 283 / 287

Help Guide
How to Use
Troubleshooting
IC recorder operations
Software operations (Sound
Organizer)
Messages
System limitations
List of Topics
Print
IC Recorder
ICD-PX333/PX333F
Messages list
Follow the instructions below if a message appears on the display.
HOLD
All the button operations are disabled because the IC recorder is in the HOLD
status to prevent unintentional operations. Slide the HOLD•POWER ON/OFF switch
towards the center to release the IC recorder from the HOLD status.
(See “
Releasing the HOLD function .”)
Low Battery
The batteries are exhausted. Replace the old LR03 (size AAA) alkaline batteries
with new ones. Or replace the old rechargeable batteries with new ones.
(See “
Inserting batteries .”)
Memory Card Error
An error occurred while a memory card was being inserted into the memory card
slot. Remove and try inserting it again. If this message persists, use a new
memory card.
Memory Card Not Supported
A memory card that the IC recorder does not support is inserted.
(See “
About compatible memory card .” )
An M2™ that the IC recorder does not authorize is inserted.
(See “
About compatible memory card .”)
Read Only Memory Card
A read-only memory card is inserted. A read-only memory card cannot be used
with the IC recorder.
Memory Card Locked
The memory card is write-protected. A write-protected memory card cannot be
used with the IC recorder.
Memory Card Access Denied
Since a memory card containing an access control function is inserted, you cannot
use it.
Memory Full
The remaining memory capacity of the IC recorder is insufficient. Erase some files
before recording.
(See “
Erasing a file .”)
Back Back to Top
275
Search