ICD Q&A (ICD-P110/P210)_GB(U, CA, CE7, JE, C1, JE) 2-348-239-11(1)
Q9
A9
Q8
A8
To record sound from other equipment
(tape recorder, MiniDisc player, etc.)
with the IC recorder, how should I
connect the other equipment?
Use an audio connecting cable with a resistor to
connect the earphone (headphones) jack of a tape
recorder, a MiniDisc player, or other device and
the microphone jack of the IC recorder.
To the MIC (microphone)
jack
To the
earphone
(headphones)
jack
Audio
connecting cable
Tape recorder, MiniDisk
player, etc.
Notes
• When recording, we suggest you set the MIC SENS
(microphone sensitivity) of your IC recorder to HIGH,
the mode for recording a meeting.
• To adjust the recording level, use the volume control
function of the tape recorder, MiniDisc player, or
other device.
• If you use an audio connecting cable without a
resistor to connect the sound source to the IC
recorder, the sound may be recorded with
interruptions. We suggest you use an audio
connecting cable with a resistor.
Can I record sound from a telephone or
a cell phone?
You can use the headphones-type electret
condenser microphone ECM-TL1 (not supplied) to
record sound from a telephone or a cell phone.
1
Plug the microphone into the MIC
(microphone) jack of the IC recorder (
1
),
and set the ear piece into your ear (
2
).
When you connect the external microphone,
the built-in microphone is automatically cut
off and the IC recorder will record sound from
the microphone. The power is automatically
supplied to the microphone from the IC
recorder.
Q11
A11
IC recorder
Q12
A12
Printed on 100% recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.
1
2
To the MIC
(microphone)
jack
Earphones-type
microphone
2
Place the telephone receiver to your ear
and record conversation.
Q10
A10
How can I select and use the recording
modes (HQ/SP/LP) properly?
Please select and use the recording mode
according to the following criteria:
HQ (High Quality) mode:
To make a very important recording with the
highest sound quality, select this mode.
SP (Standard Play) mode:
To make an important recording with higher
sound quality, select this mode.
LP (Long Play) mode:
To record a casual meeting or a memorandum,
select this mode. You can record for a longer
time.
Is there any limit in recording time for
each folder?
There is no limit in recording time for each
folder. You can record the maximum
recording time in a single folder. (When you
record multiple messages, you may not be able
record the maximum recording time because of
the system limitations. For details, see the
operating instructions. )
How do the function of dividing a
message work?
You can divide a message during recording or
playback, so that the message is divided into
two and the new message number is added to
the divided message. By dividing a message,
you can easily find the point you want to play
back when you make a long recording such as
a meeting.
You can divide messages until the total number
of messages in the folder becomes 99.
Notes
•Once a message is divided, you cannot combine the
divided messages.
• If you divide a message frequently, the unit may
become unable to divide a message.
• If you divide a message with an alarm setting, the
alarm setting remains only with the former message
divided.
• You cannot divide a message in the first or the last 1
second.
GBICDQAP110.p65
9/23/04, 11:00 PM
2
