Sony HVR-Z1E Operating Instructions Manual Download Page 99

Page: 99 / 136

Du
b

itin
g

Dubbing/Editing

Dubbing sound to a
recorded tape

You can record additional audio to the
original sound on a tape recorded in the
DVCAM format and the FS32K audio mode.

Preparing for audio dubbing

Input audio in one of the following
ways.

• Using the internal microphone (no

connection required).

• Connecting a microphone or an audio

device (optional) to the INPUT1/INPUT2
connectors. (

)

• Connecting an audio device (optional) to

the AUDIO/VIDEO jack. (

)

Select the

(AUDIO SET) menu,

[MIC SELECT], then [XLR] (p. 66).

To use the internal microphone, select
[INTERNAL MIC].

When using the INPUT1/INPUT2
connectors, set the menu items in
accordance with the connector and the
connected device.

To use a microphone

• When the microphone is connected to the

INPUT1 connector, set [INPUT1
LEVEL] to [MIC].

INPUT1/INPUT2 connectors

Microphone (optional)

A/V connecting cable
(supplied)

Internal
microphone

Signal flow

AUDIO/VIDEO jack

Audio device (such as a
CD/MD player)

Do not connect the
Video plug (yellow).

Audio output jacks

Audio R
(red)

Audio L
(white)

INPUT1/INPUT2
PHANTOM switch

continued

Summary of Contents for HVR-Z1E









































































































































Search results

Summary of Contents for HVR-Z1E

Reviews:

Related manuals for HVR-Z1E

Brands by name

Popular brands

Sony HVR-Z1E, Operating Instructions Manual

Search results

Summary of Contents for HVR-Z1E

Reviews:

Related manuals for HVR-Z1E

Brands by name

Popular brands