Sony HVR-Z1E Operating Instructions Manual Download Page 108

Page: 108 / 136

Troubleshooting

108

Cassette tapes

LCD screen/viewfinder

The remaining battery time indicator
does not indicate the correct time.

• The temperature of the environment is too high or too low, or the battery

pack has not been charged enough. This is not a malfunction.

Fully charge the battery again. If the problem persists, replace the
battery pack with a new one. It may be damaged (p. 11, 119).

The power turns off frequently
although the remaining battery
indicator indicates that the battery
pack has enough power to operate.

• A problem has occurred in the remaining battery time indicator, or the

battery pack has not been charged enough.

Fully charge the battery again to correct the indication (p. 11).

A problem occurs when the
camcorder is connected to the AC
Adaptor/charger.

Turn off the power, and disconnect the AC Adaptor/charger from the
wall socket. Then, connect it again.

Symptom

Cause and/or Corrective Actions

Cassette cannot be ejected from the
compartment.

Make sure the power source (battery pack or AC Adaptor/charger) is
connected correctly (p. 11).

Remove the battery pack from the camcorder, then attach it again (p. 11).

Attach a charged battery pack to the camcorder (p. 11).

Cassette is not ejected even when the
cassette lid is open.

Moisture condensation is starting in your camcorder (p. 121).

The Cassette Memory indicator does
not appear while using a cassette with
Cassette Memory.

Since your camcorder is not compatible with the Cassette Memory, no
indicator appears.

The remaining tape indicator is not
displayed.

Set [

REMAINING] to [ON] on the

(OTHERS) menu to always

display the remaining tape indicator (p. 81).

Symptom

Cause and/or Corrective Actions

An unknown language appears on the
screen.

See page 19.

An unknown indicator appears on the
screen.

Refer to the indicator list (p. 133).

The picture in the viewfinder is not
clear.

Use the viewfinder lens adjustment lever to adjust the lens (p. 16).

The picture in the viewfinder has
disappeared.

Close the LCD panel. The picture is not displayed in the viewfinder
when the LCD panel is open (p. 16). When [VF POWER] is set to [ON],
pictures appear on both the LCD panel and the viewfinder (p. 70).

Symptom

Cause and/or Corrective Actions

Summary of Contents for HVR-Z1E









































































































































Search results

Summary of Contents for HVR-Z1E

Reviews:

Related manuals for HVR-Z1E

Brands by name

Popular brands

Sony HVR-Z1E, Operating Instructions Manual

Search results

Summary of Contents for HVR-Z1E

Reviews:

Related manuals for HVR-Z1E

Brands by name

Popular brands