background image

24

Chapter 1

Overview

Ch
ap
te

r 1

O

v

e

rv

ie

w

Displaying Various Data

i

Time counter (time code/user bits/count value of 
the counter) indicator 

Displays the count value of the counter, time code, or 
user bits. By pressing the COUNTER SELECT button 
on the front panel, you can select the item to be 
displayed.
When the time code is displayed, 

 appears to its left.

In the drop frame mode, a period is displayed between 
the minutes and seconds (i.e., 00:12.58:00).
When the user bits are displayed, 

 appears to their

left.
When the count value of the counter is negative, “–” 
appears as the first digit (leftmost digit). When that 
value is positive, the first digit is blank.
The count value of the counter consists of seven digits.
If the self-diagnostic function is enabled, diagnostics 
code numbers are displayed.

When you playback a tape without a time code or with 
a time code recorded in different formats, the time code 
cannot be displayed correctly. 

j

Remaining tape time indicator 

Displays the remaining tape time. 

For details, see “

REMAINING” in the “DISPLAY SET” 

menu on page 75. 

• The remaining tape time displayed is an estimated 

time.

• When you insert a cassette of which the tape has been 

rewound to the beginning, this indicator does not show 
the remaining tape time. The remaining tape time is 
displayed after the tape runs for a while. 

k

INPUT SELECT indicator 

Changes according to the position of the INPUT 
SELECT switch. ([HDV/DV IN], [S VIDEO IN] or 
[VIDEO IN]) 

l

 (Index) indicator 

Displays 

 when an index has been marked. 

m

Search indicator 

Displays the search mode when you search for scenes 
using the Remote Commander. 

For details on the search function, see “Searching using the 
search function” on page 41. 

n

Audio mode indicator 

In the recording mode, displays 

 when you select 

[FS32K] for [AUDIO MODE] in the [AUDIO SET] 
menu.
When you select [FS48K], 

 is displayed.

During playback or audio dubbing, displays the audio 
mode recorded on the tape. During i.LINK input, 
displays the audio mode of the signal input to the 

HDV/DV jack.

• The audio mode will not be displayed when [HDV/DV 

SEL] in the [IN/OUT REC] menu is set to [HDV].

• Signals other than HDV/DVCAM lock mode will 

become non-standard audio and 

/

 is 

displayed during playback or when the signal is input 
from the  HDV/DV jack.

o

Date/time indicator 

When you press the DATA CODE button of the Remote 
Commander or set [DATA CODE] in the [DISPLAY 
SET] menu to [DATE], you can display the recording 
date/time. 

For details on the date/time indicator, see “Displaying 
information (data codes) recorded on a tape” on page 39. 

Note

Note

TC

UB

Notes

Summary of Contents for HVR-M25AE













































































































Reviews: