background image

3

GB

Hereby, Sony Corporation declares that 
this equipment is in compliance with 
Directive 2014/53/EU.
The full text of the EU declaration of 
conformity is available at the following 
internet address: 

 

https://compliance.sony.eu

Hereby, Sony Corporation declares that 
this equipment is in compliance with the 
UK relevant statutory requirements.
The full text of the declaration of 
conformity is available at the following 
internet address: 

 

https://compliance.sony.co.uk

This radio equipment is intended to be 
used with the approved version(s) of 
software that are indicated in the 
Declaration of Conformity. The software 
loaded on this radio equipment is 
verified to comply with the essential 
requirements of the Radio Equipment 
Regulations.
The software version can be found in 
[SYSTEM] - [VERSION] in the setting 
menu.

This equipment should be installed and 
operated keeping the radiator over 20 
cm away from person’s body.

Disposal of waste 
batteries and 
electrical and 
electronic 
equipment 
(applicable in the 
European Union 

and other countries with separate 
collection systems)

This symbol on the product, the battery 
or on the packaging indicates that the 
product and the battery shall not be 

treated as household waste. On certain 
batteries this symbol might be used in 
combination with a chemical symbol. 
The chemical symbol for lead (Pb) is 
added if the battery contains more than 
0.004% lead. By ensuring that these 
products and batteries are disposed of 
correctly, you will help to prevent 
potentially negative consequences for 
the environment and human health 
which could be caused by inappropriate 
waste handling. The recycling of the 
materials will help to conserve natural 
resources. In case of products that for 
safety, performance or data integrity 
reasons require a permanent connection 
with an incorporated battery, this 
battery should be replaced by qualified 
service staff only. To ensure that the 
battery and the electrical and electronic 
equipment will be treated properly, 
hand over these products at end-of-life 
to the appropriate collection point for 
the recycling of electrical and electronic 
equipment. For all other batteries, 
please view the section on how to 
remove the battery from the product 
safely. Hand the battery over to the 
appropriate collection point for the 
recycling of waste batteries. For more 
detailed information about recycling of 
this product or battery, please contact 
your local Civic Office, your household 
waste disposal service or the shop 
where you purchased the product or 
battery.

Summary of Contents for HT-S40R





















































Reviews: