23
GB
A
ddi
tional
Informat
ion
Sound may be interrupted when the
sampling frequency or the number of
channels of audio output signals from
the playback device is switched.
If the connected device is not
compatible with copyright-protection
technology (HDCP), the image and/or
the sound from the HDMI OUT jack of
this system may be distorted or may
not be output. In such a case, check
the specifications of the connected
device.
Saving power in standby
mode
Check that you have made the following
settings:
“CTRL” in “HDMI>” is set to “OFF”
(page 19).
“BTSTB” in “BT >” is set to “OFF”
(page 19).
Precautions
On safety
Should any solid object or liquid fall into
the system, unplug the system and have
it checked by qualified personnel before
operating it any further.
Do not touch the AC power cord (mains
lead) with wet hands. Doing so may cause
an electric shock.
Do not climb on the Bar Speaker,
Subwoofer and Surround Speakers as you
may fall down and injure yourself, or
system damage may result.
On power sources
Before operating the system, check that
the operating voltage is identical to your
local power supply. The operating voltage
is indicated on the nameplate at the rear
of the Subwoofer.
If you are not going to use the system for
a long time, be sure to disconnect the
system from the wall outlet (mains). To
disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the
cord.
AC power cord (mains lead) must be
changed only at a qualified service shop.
On heat buildup
Although the system heats up during
operation, this is not a malfunction.
If you continuously use this system at high
volume, the system temperature rises
considerably. To avoid burning yourself, do
not touch the system.
On placement
Place the system in a location with
adequate ventilation to prevent heat
buildup and prolong the life of the
system.
Additional Information
