Sony HT-MT500, Service Manual

Page: 11 / 66

HT-MT500/MT501
11
2-4. TOP PANEL BLOCK, BOTTOM PANEL BLOCK
rear side
left side
top side
top panel block
3
FFC 22P
(CN707)
top side
1
eight screws
(BVTP3
u
10)
front side
left side
right side
top panel
9
Open the top panel
block in the direction
of the arrow.
right side
2
Lift up the top cabinet block
in the direction of the arrow
at about a 90-degree angle.
7
speaker connection cable
connector (CN6010)
8
speaker connection cable
connector (CN6011)
0
top panel block
Note: Lay a soft piece of cloth under the unit
to avoid damaging the top panel.
wiring
stopper
5
Draw the speaker
connection cable
out of groove.
5
Draw the speaker
connection cable
out of groove.
6
Draw the speaker connection
cable out of slot.
BAR-AMP board
MB-1610 board
BAR-AMP
board
DISPLAY
board
terminal side
CN707
FFC 22P
qa
bottom panel block
4
Remove the speaker
connection cable from
the wiring stopper.
4
Remove the speaker connection
cable from the wiring stopper.
‡:LUHVHWWLQJ
wiring stopper
BAR-AMP
board
‡:LUHVHWWLQJ
OK NG
‡:LUHVHWWLQJ
1
eight screws
(BVTP3
u
10)
rear side
groove
rear side
groove
rear side
Press.
Press.
‡)OH[LEOHIODWFDEOHVHWWLQJ
Cable is lowered
past the top.
Cable is flush with
the top.