Sony HT-DDW960 Operating Instructions Manual Download

Page: 6 / 56

masterpage:Left

lename[E:\SEM_Janet\Data_HT-

DDW960\J9040000_4255298611DDW960US\4255298611\GB03CON_HT-DDW960-U.fm]

model name1[HT-DDW960]

[4-255-298-

(1)]

Required cords

The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (

) (not supplied unless indicated).

Audio cord

White (L)
Red (R)

Audio/video cord

Yellow (video)
White (L/audio)
Red (R/audio)

Video cord

Yellow

Optical digital cord

Coaxial digital cord (supplied)

Orange

Monaural audio cord

Black

Tip

Audio cord

can be torn into two monaural audio

cords

Component video cord

Green
Blue
Red

Notes

• Turn off the power to all components before making any connections.

• Be sure to make connections firmly to avoid hum and noise.

• When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the

components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.

• When connecting optical digital cords, insert the cord plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

GB01COV_HT-DDW960-U.book Page 6 Thursday, April 15, 2004 6:05 PM

Summary of Contents for HT-DDW960

























































Search results

Summary of Contents for HT-DDW960

Reviews:

Related manuals for HT-DDW960

Brands by name

Popular brands

Sony HT-DDW960, Operating Instructions Manual

Search results

Summary of Contents for HT-DDW960

Reviews:

Related manuals for HT-DDW960

Brands by name

Popular brands