Sony HT-DDW960 Operating Instructions Manual Download

Page: 21 / 56

Ampl

ifier O

ration

masterpage:Right

lename[E:\SEM_Janet\Data_HT-

DDW960\J9040000_4255298611DDW960US\4255298611\GB04BSC_HT-DDW960-U.fm]

model name1[HT-DDW960]

[4-255-298-

(1)]

Press input buttons to select the input.

The selected input appears in the display.

Turn on the component and start
playback.

Note

If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.

Turn MASTER VOLUME –/+ to adjust
the volume.

Note

To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.

To use the headphones

Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker

output is automatically canceled and “SP A”
and “SP B” do not light up in the display.

• When the headphones are connected, you can

select only the following sound fields
(page 28).

– HP 2CH (HEADPHONE 2CH)

– HP MULTI (HEADPHONE MULTI)

– HP THEA (HEADPHONE THEATER)

Amplifier Operation

Selecting the component

To select the

Press

VCR

VIDEO 1 or
VIDEO 2

Satellite tuner

VIDEO 2

DVD player

DVD

MD or tape deck

MD/TAPE

Super Audio CD or
CD player

SA-CD/CD

Built-in tuner (FM/AM)

TUNER FM/AM

GB01COV_HT-DDW960-U.book Page 21 Thursday, April 15, 2004 6:05 PM

Summary of Contents for HT-DDW960

























































Search results

Summary of Contents for HT-DDW960

Reviews:

Related manuals for HT-DDW960

Brands by name

Popular brands

Sony HT-DDW960, Operating Instructions Manual

Search results

Summary of Contents for HT-DDW960

Reviews:

Related manuals for HT-DDW960

Brands by name

Popular brands