Sony HT-DDW680, Operating Instructions Manual

Page: 55 / 60

55 GB
F:\Sony SEM HA\Data_DDW680\J9051833_2661459311DDW680_GB\2661459311\050AMP_HT-
DDW680_E51.fm masterpage: Right
HT-DDW680
2-661-459- 31 (1)
Ad
diti
on
al
I
n
fo
rmatio
n
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy
the problem (page 19). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver’s memory
Specifications
Amplifier section
Models of area code E51, MX
Power Output
1)
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 70 W/ch
CENTER
2)
: 70 W
SUR
2)
: 70 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER
2)
: 70 W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SUR
2)
: 100 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 100 W
Models of area code AR
Power Output
1)3)
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 70 W/ch
1)
, 65 W/ch
3)
CENTER
2)
: 70 W
1)
, 65 W
3)
SUR
2)
: 70 W/ch
1)
, 65 W/ch
3)
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER
2)
: 70 W
1)
, 65 W
3)
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 100 W/ch
1)
, 90 W/ch
3)
CENTER
2)
: 100 W
1)
, 90 W
3)
SUR
2)
: 100 W/ch
1)
, 90 W/ch
3)
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 100 W
1)
, 90 W
3)
1)
Measured under the following conditions:
2)
Depending on the sound field settings and the
source, there may be no sound output.
3)
Measured under the following conditions:
To clear See
All memorized settings page 19
Customized sound fields page 42
Area code Power requirements
E51 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
AR 230 V AC, 50 Hz
Area code Power requirements
AR 220 V AC, 50 Hz
continued
010COV_HT-DDW680_E51.book Page 55 Wednesday, January 18, 2006 10:55 AM