O
p
er
ati
ons U
s
ing
the R
e
mo
te
R
M
-A
A
U
0
0
2
masterpage:Right
lename[E:\SEM_Janet\DATA_DDW670T\J9050851_2342216911DDW670T_US\2342216911\G
B08REM_HT-DDW670T-U.fm]
35
US
model name1[HT-DDW670T]
[2-342-216-
91
(1)]
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• When you press input buttons (VIDEO 1, VIDEO 2
or DVD), the input mode of the TV might not switch
to the corresponding input mode that you want. In
this case, press TV/VIDEO button to switch the input
mode of the TV.
• To activate the buttons with orange printing, press
TV and the button you want simultaneously.
.
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a CD player and
you do not have a DVD player, you can assign
the DVD button to your CD player.
1
Hold down the input button whose
input you want to change (for example,
DVD).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 5 – CD
player).
The following buttons are assigned to select
the input:
*Sony VCRs are operated with a VTR 2 or 3
setting. These correspond to 8 mm and VHS
respectively.
Now you can use the DVD button to control
the CD player.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the input buttons to
their factory setting
Press
?/1
, TEST TONE and MASTER VOL –
at the same time.
Remote
Button
Operations
Function
X
ws
VCR/
CD player/
DVD player/
MD deck/
Tape deck
Pauses playback or
recording. (Also starts
recording with
components in
recording standby.)
x
w;
VCR/
CD player/
DVD player/
MD deck/
Tape deck
Stops playback.
O
wj
DVD player
Returns to the
previous menu or
exits the menu.
V
/
v
wk
Receiver
Selects a menu item.
B
/
b
wk
Receiver
Adjusts or changes
the setting.
V
/
v
/
B
/
b
wk
VCR/
Satellite tuner/
DVD player
Selects a menu item.
Changing the factory
setting of an input button
To operate
Press
VCR (command mode VTR 3*)
1
VCR (command mode VTR 2*)
2
DVD player or
DVD recorder
(command mode DVD 1)
3
DVD recorder
(command mode DVD 3)
4
CD player
5
MD deck
6
Tape deck B
7
Tuner (this receiver)
8
DSS (Digital Satellite Receiver)
9
DCS (Digital CS Tuner)
0/10
BSD (Digital BS Tuner)
-/--
GB01COV_HT-DDW670T-U.book Page 35 Wednesday, June 22, 2005 3:09 PM
