5
Confirm that the operation lamp is off (
), and then press and slide REC on the
recorder (
).
The operation lamp lights up in red and recording starts.
If you insert a previously recorded disc, the recording starts after the existing contents.
REC
The operation lamp
Basic recording operations
To
Press
Stop
Press
· CANCEL. (The operation lamp disappears.)
Pause
Press
*. (The operation lamp flashes in red.) Press
again to resume
recording.
Remove the disc
Press
· CANCEL and open the lid. (The lid does not open until
“SystemFILE WRITING” disappears from the display and the operation
lamp stops flashing.)
Adding track marks
Press T MARK. (The operation lamp disappears for a moment.)
* A track mark is added at the point where you press
again to resume recording while pausing; thus the
remainder of the track will be counted as a new track.
33
MZ-RH1/MZ-M200.GB.2-669-084-11(1)
Recording on a disc
