16
2-1 Control Panels
Chap
te
r 2
Lo
c
a
ti
on and
F
u
n
c
tion
o
f P
a
rt
s
“AES1”:
AES/EBU CH1
“AES2”:
AES/EBU CH2
“AES3”:
AES/EBU CH3
“AES4”:
AES/EBU CH4
“ANA1”:
ANALOG CH1
“ANA2”:
ANALOG CH2
“SG”:
Internal audio test signal (when F6 (AUDIO SG) is
set to “ON” in function menu page P08: AUD INP)
“HDV1”:
HDV CH1
a)
(when an option is installed)
“HDV2”:
HDV CH2
a)
(when an option is installed)
a) The digital audio input channel numbers are all selected at one time.
The audio input selection is not displayed when the audio
levels of track 5 to 8 are being indicated during MPEG
IMX tape playback on this unit.
• Monitor selection
Whether or not tracks are currently selected for monitoring
is indicated on the left and right sides of the digital audio
track/input channel number 1 indication. When
MONITOR CH1 (L) is selected, “L” is indicated. When
MONITOR CH2 (R) is selected, “R” is indicated.
• CUE track input selection
Whether the CUE track input is selected or not is indicated
under the CUE track indication (CUE).
Only one input channel number is displayed:
The
signals from the input channel indicated by the
number are recorded.
Input channel number, +, input channel number are
displayed:
The signals from the two input channels
indicated by the numbers are mixed and recorded.
On how to select the CUE track input method, see setup
menu item 833 “CUE AUDIO INPUT SELECT”.
4
Audio level meter block 2
Audio level meter indication block
This indicates the audio levels of four digital track
channels and one CUE (analog) track channel.
The CUE track is shown only if a Digital Betacam or
HDCAM tape is currently loaded in the unit.
There are three types of digital track audio level indication.
As shown below, the indications are different for each
type.
“FULL”-“PEAK0”:
The maximum level is indicated as
0 dB.
“FULL”-“REF.0”:
The reference level is indicated as
0 dB.
“FINE”:
The region near the reference level (–3 to
2.75 dB) is enlarged for display.
For details on “FINE” and “FULL”, see the settings of F4
(MT.SCALE) in function menu page P08: AUD INP.
For details on “REF.0” and “PEAK0”, see “LEVEL
METER SCALE” in setup menu item 806.
• Input channel indication
The input channels from which signals are recorded are
indicated for the digital tracks (1 to 4).
Only one input channel number is displayed:
The
signals from the input channel indicated by the
number are recorded on the track.
Input channel number, +, input channel number are
displayed:
The signals from the two input channels
indicated by the numbers are mixed and recorded on
the track.
Input channels are not displayed when the audio levels of
digital track 5 to 8 are being indicated during MPEG IMX
tape playback on HDW-D1800.
• Data/Emphasis indication
This indicates the attributes of the signals to be recorded on
or played back from the specified track.
“EMPH”:
Indicates that the current signals are audio
signals with EMPHASIS set to “ON”.
“DATA”:
Indicates that the current signals are non-audio
data (for example, Dolby-E).
“ ” (blank):
Indicates that the current signals are neither of
the above (EMPHASIS for audio signals is set to
“OFF”).
• Cursor
When the audio level indications of digital tracks are as
shown below, level values in the corresponding range and
marker dots are displayed.
“PEAK0”:
–
60 to 0 dB
“REF.0”:
–
40 to 20 dB
“FINE”:
–
2 to 2 dB
Note
3 + 4
2
-60
-40
-30
-20
-10
0
dB
1
4
-60
-40
-30
-20
-10
0
dB
-40
-20
-10
0
10
dB
EMPH
DATA
Input channel indication
Data/Emphasis indication
Cursor
Headroom mark
Audio level indication
Note
