Attaching to the Camera
9
Attaching to the Camera
When the viewfinder is attached, do not leave the camera
with the eyepiece facing the sun. Direct sunlight can enter
through the eyepiece and be focused in the viewfinder,
which may cause the OLED panel to burn out or cause a
fire.
1
Loosen the left-right positioning ring on the camera.
2
Insert the slide guide which is located on the front of
the camera into the slide rail which is located on the
back of the viewfinder.
3
Slide the viewfinder in the direction of the arrow.
4
Position the viewfinder by sliding it from side to
side, and tighten the left-right positioning ring on the
camera.
5
Connect the plug to the VF connector on the camera.
Always check to be sure that the plug is firmly inserted
into the camera’s VF connector.
To detach the viewfinder
To detach the viewfinder from the camera, conduct the
attachment procedure in reverse. When removing the
viewfinder from the camera, pull up the stopper.
Note about loading in carrying case
When loading the camera with viewfinder attached into a
carrying case, make sure that the camera and the
viewfinder fit into the case without having to be forced.
Applying undue pressure can result in damage to the
camera or viewfinder.
Note
Stopper
Left-right
positioning
ring
Slide rail
Slide guide
Plug
VF connector
Note
