Sony HDCU1000, Maintenance Manual

Page: 24 / 334

2-4 (E)
MM/HDCU1000 Series
5. Attach the fuse in the reverse order.
n
A spring is already attached in the fuse holder. When
attaching a new fuse, rotate the flat-blabe screwdriver
in the direction of arrow C (by about 90
d ) while
pressing it in the direction of arrow B to lock the fuse
holder.
Fuse holder
B
C
Flat-blabe
screwdriver
2-1-3. Replacing the Fuse (HDCU1000/1080)
w
The components marked ! are critical to safe operation. If
you replace with parts other than the specified ones, a fire
or electric shock may result from that.
Replacement Part
MAIN fuse
Part : Fuse (6.3 A, 250 V)
Part No. :
!
1-576-233-11
CAMERA fuse
For UC
100 to 120 V
Part :
Fuse ( 6.3 A, 250 V)
Part No. : ! 1-576-233-11
For CE, CN
220 to 240 V
Part :
Fuse (4 A, 250 V)
Part No. : ! 1-576-231-11
Replacement Procedure
1. Remove the PS panel assembly.
(Refer to Section 2-1-1.)
2. Insert a flat-blabe screwdriver into the groove of the
fuse holder, and rotate it in the direction of arrow A
(by about 90
d
) to unlock. (Fig. 1)
3. Remove the fuse with the fuse holder. (Fig. 2)
4. Remove the fuse from the fuse holder. (Fig. 3)
Fig.1
Fig.2
Fig.3
MAIN fuse
CAMERA fuse
A
Flat-blabe
screwdriver
Fuse holder
Fuse holder
Fuse holder
Groove
Fuse
Two fuse holders