8
Rear Panel
a
Video signal select buttons
Select the video output signal (R, G, or B) to the viewfinder.
The R, G, and B buttons may be pressed individually or in
combination. The signal corresponding to each pressed
button will be output. When two buttons are pressed, the
output will consist of those two signals mixed together. When
all three buttons are pressed, the output to the viewfinder will
be the Y signal.
When no buttons is pressed, the output will be a color signal if
the viewfinder is a color model, and it will be the Y signal if the
viewfinder is a monochrome model.
The video output to the monitor connected to the TEST OUT
connector of the camera will also depend on the setting of
these buttons (however, this output is in monochrome in all
situations).
b
POWER indicator
This indicator lights up or goes off as follows to indicate the
power supply status:
Green:
Power is being supplied to the camera.
Red:
Power is being supplied to the camera, but the CAM PW
button of the MSU-1000/1500 Master Setup Unit or RCP-
1000/1500-series Remote Control Panel is set to OFF.
Yellow:
Power is being supplied to the camera, but the VF PW
button of the MSU-1000/1500 Master Setup Unit or RCP-
1000/1500-series Remote Control Panel is set to OFF,
and power is not being supplied to the viewfinder.
Off:
Power is not being supplied to the camera.
c
USB connector (for connecting a USB drive)
You can connect a USB drive to save/load a setting data file.
For details, see “Using a USB Drive” (page 57)
d
ND filter selector
When the FILTER LOCAL button is lit up, this selector may be
used to select an ND filter.
e
CC (color temperature conversion) filter selector
When the FILTER LOCAL button is lit up, this selector may be
used to select a color temperature conversion filter
appropriate to the light source illuminating the subject.
f
FILTER LOCAL (filter local control) button
Pressing this button enables selecting of a color temperature
conversion filter using the CC filter selector or an ND filter
using the ND filter selector. Pressing the button again gives
control of the filters to the MSU-1000/1500 Master Setup Unit
or RCP-1000/1500-series Remote Control Panel.
1
ON
POWER
R
G
B
FILTER LOCAL
2
3
4
1
2
3
4
1
2
3
4
1
ND
2
3
4
1
5
CC
B C D
A
E
H-PO
S
I
V-PO
S
I
WIDTH
HEIGHT
VF DETAIL
CUR
S
OR
1
2
3
UP TALLY
ON
ON
OFF
COLOR
DETAIL
ON
OFF
ZOOM
LINK
ON
OFF
FOCU
S
A
SS
I
S
T BAR
1
CALL
S
TORE
EXT
VF A
SS
IGN
A
SS
IGN
MENU
S
ELECT
CANCEL ENTER
RET 2
RET 1
RET
3
ON
OFF
OFF
S
CREEN
S
IZE
MARKER
ON
OFF
MARKER
ON
OFF
MIX VF
ON
MENU
DI
S
PLAY
OFF
1
egef
es
e;
ed
ea
wl
wk
wj
wh
ws
wa
wg
wd
wf
ql
w;
2
7
8 9 q; qa
qs
qd
qg
qh
qj
qk
qf
5
3
6
4
eh
Memo clip
Intercom panel (
and
Selector position
Selected filter
1
Clear
2
1/4ND
3
1/8ND
4
1/16ND
5
1/64ND
Selector position
Selected filter
A
Cross filter
B
3200K (clear)
C
4300K
D
6300K
E
8000K
