30
HCD-ZUX9
[CD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
to vibration. Use this mode when returning the set to the
customer after repair.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function.
3. Press
[CD]
button and
@/1
button simultaneously. The system
turns off automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” is displayed on the fluorescent indicator
tube and the CD ship mode is set.
[CD/USB POWER MANAGE]
• This mode let you switch on or off power supply to the CD
and USB block during TUNER function.
• When CD/USB POWER is set to OFF, the power supply to
the CD and USB block is cut off during TUNER function. It
will increase the time taken to access CD or USB device when
the function change from TUNER to CD or USB but it will
improve tuner reception.
• When CD/USB POWER is set to ON, the power supply to the
CD and USB block is not cut off during TUNER function. It
will reduce the time taken to access CD or USB device when
the function change from TUNER to CD or USB but it will
decrease tuner reception performance.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function.
3. Press
@/1
button to turn off the system.
4. Press
x
button and
@/1
button simultaneously. The system
turns on automatically.
5. The message “CD/USB POWER ON” or “CD/USB POWER
OFF” will be displayed on the fluorescent indicator tube.
[CD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when
Z
button or
[DISC
SKIP/EX-CHANGE]
button is pressed. The message
“LOCKED” will be displayed on the fluorescent indicator tube.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function.
3. Press
x
button and
Z
button simultaneously and hold down
until “LOCKED” or “UNLOCKED” displayed on the
fluorescent indicator tube (around 5 seconds).
[TCM OFFLINE MODE]
• This mode prevents the system from turning off automatically
when TCM is not connected. Therefore, measurements can
be done even when TCM is not connected during production.
Procedure:
1. When the system in turned off, press
[EQ BAND/MEMORY]
button,
[CD-TAPE SYNC]
button and
@/1
button simultaneously. The
system turns on automatically.
2. The message “TCM OFFLINE” will be displayed on the
fluorescent indicator tube.
[REMOTE DISABLE MODE]
• This mode let you disable the remote commander reception.
When this mode is activated, the system will not response if
the button on the remote commander is pressed. The message
“Remote Disable” appears on the fluorescent indicator tube.
This mode is essential for conducting test and repairing when
no interruption from the other remote commander is expected.
This mode is cancelled automatically when the system is turned
off.
Procedure:
1. Press
@/1
button to turn on the system.
2. Press
x
button,
[FLANGER]
button and
[DISC 2]
button
simultaneously until “Remote Disable” or “Remote Enable”
appears on the fluorescent indicator tube.
[FACTORY PRESET]
• This mode is use to load all the factory use preset frequencies
into FM 1-FM 20 and AM 1-AM 10. Originally, frequency of
FM 1-FM 20 and AM 1-AM10 are set to the minimum.
Procedure:
1. Press
@/1
button to turn on the system.
2. Press
@/1
button,
[TUNER/BAND]
button and
Z
button
simultaneously and the message “Factory” appears on the
fluorescent indicator tube. The function is changed to TUNER
automatically.
• To release from this mode, operate the cold reset. (Refer to
the “COLD RESET”).
[VACS DISPLAY]
• This mode is used to check the VACS level.
Procedure:
1. Press
@/1
button to turn on the system.
2. Press
x
button,
[CD]
button and
[DISC SKIP/EX-CHANGE]
button simultaneously.
3. The fluorescent indicator tube displays “V$T% F AP#”.
“V” represents Conventional VACS (Triggered by signal level)
“T” represents Thermal VACS NEO (Triggered by
temperature)
“AP” represents APVACS (Abuse Protection VACS)
“$” is the Conventional VACS level.
“%” is the Thermal VACS NEO level.
“#” is the APVACS level.
“F” is shown if the fan is triggered by software to turn in high
speed.
• To release from VACS display mode, do the step (2) again.
[MP3 BOOSTER ON/OFF]
• MP3 Booster is built-in features of this model. It turns on
automatically when the MP3 audio track is played back. By
using this mode, you can turn on or off the MP3 Booster
manually.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function and play back an MP3 audio track.
3. Press
[RETURN]
button,
[FLANGER]
button and
[DISC 3]
button
simultaneously. The message “BOOSTER OFF” or
“BOOSTER ON” appears on the fluorescent indicator tube.
Summary of Contents for HCD-ZUX9
Page 117: ...117 HCD ZUX9 MEMO ...