![background image](http://html.mh-extra.com/html/sony/hcd-zux9/hcd-zux9_service-manual_1329788029.webp)
29
HCD-ZUX9
[CD ERROR CODE MODE]
• Display the CD error code when an error occurred
Procedure:
1. Press
@/1
button to turn on the system.
2. Press
x
button,
[ENTER]
button and
[DISC 1]
button
simultaneously to enter the error code display mode.
3. The fluorescent indicator tube displays the number of total
error.
4. Each time
m/
–
button or
M/
+
button is pressed,
display change as below.
5. To clear the error record, operate the cold reset. (Refer to the
“COLD RESET”)
6. To release from this mode, press the
@/1
button or disconnect
the power plug to turn off the system.
• Display of total error
Em** : The number of mechanical errors.
Ed** : The number of no disc errors after chucking the disc.
• Display of mechanical errors
M*
: The number of mechanical error (“0” is latest one)
(Press
>
button to display the next error)
$$
: Not used
%%
: Loading related error (Second figure is not used)
D
: Stop by the problem other than mechanical
problem while closing.
E
: Stop by the problem other than mechanical
problem while opening.
C
: Stop by the problem other than mechanical
problem while chucking up.
F
: Stop by the problem other than mechanical
problem while chucking down.
&&
: Emerging error
01
: Stop while chucking up.
02
: Stop while chucking down.
03
: Time-out of EX-CHANGE open.
05
: Time-out of EX-CHANGE close.
##
: Not used
• Display of no disc errors
D*
: The number of no disc error (“0” is latest one)
(Press
>
button to display next error)
$$
: Error type
01
: Focus error
02
: GFS error
03
: Setup error
%%
: Not used
&&:
00
: No disc judgment without chucking retry.
01
: No disc judgment after chucking retry.
##
: The state when judged as no disc
01
: Stop
02
: Setup
03
: TOC reading
04
: Access
05
: Playback
06
: Pause
07
: Manual search (Play)
08
: Manual search (Pause)
• To release from this mode, press
@/1
button.
[CD REPEAT 5 LIMIT OFF MODE]
• The number of repeat for CD playback is 5 times when the
repeat mode is “REPEAT ALL”. This mode enables CD to
repeat playback for limitless times.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function.
3. Press
x
button,
[CD]
button and
[DISC 1]
button simultaneously
to enter the CD repeat 5 limit off mode and the fluorescent
indicator tube displays “LIMIT OFF”.
• To release from this mode, operate the cold reset. (Refer to
the “COLD RESET”).
[CD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
to vibration and clears all data including preset data stored in
the RAM to initial conditions during the next AC-In. Use this
mode when returning the set to the customer after repair.
Procedure:
1. Press
@/1
button to turn on the system.
2. Select CD function.
3. Press
x
button,
[DISC 1]
button and
@ / 1
button
simultaneously. The system turns off automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” is displayed on the fluorescent indicator
tube and the CD ship mode is set.
DISPLAY OF
TOTAL ERROR
DISPLAY OF
MECHANICAL
ERRORS
BUTTON
DISPLAY OF
NO DISC
ERRORS
BUTTON
BUTTON
BUTTON
BUTTON
BUTTON
.
/TUNING –
>
/
BUTTON
>
/
M
/ +
.
/TUNING –
m
/–
BUTTON
m
/–
M
/ +
Em**Ed**
DISPLAY
M*$$%%&&##00
DISPLAY
D*$$%%&&##00
DISPLAY
Summary of Contents for HCD-ZUX9
Page 117: ...117 HCD ZUX9 MEMO ...