![background image](http://html.mh-extra.com/html/sony/hcd-v8900/hcd-v8900_service-manual_420894013.webp)
– 13 –
4. After the adjustments, apply suitable locking compound to the
Adjustment Location: Playback Head (Deck A)
Record/Playback/Erase Head (Deck B)
2. Turn the adjustment screw and check output peaks. If the peaks
do not match for L-CH and R-CH, turn the adjustment screw so
that outputs match within 1 dB of peak.
3. Mode: Playback
Tape Speed Adjustment (Deck A)
Note: Set the test mode using the following method and begin tape
speed adjustment.
In the test mode, the tape will move at double speed or normal
speed each time the H SPEED DUB button is pressed.
Procedure :
With the power turned ON, press the SPECTRUM ANALYZER
button, ENTER button, and EFFECT button simultaneously.
(The “VOLUME” on the fluorescent display tube will blink while
in the test mode.)
To exit the test mode, press the
1
/
u
button.
1. Load WS-48B into deck B.
2. Play deck B.
3. Press the H SPEED DUB button and play the tape at double
speed.
4. Adjust RV652 of the AUDIO board so that the reading of the
frequency counter becomes 6000 ± 180 Hz.
5. Press the H SPEED DUB button and play the tape at normal
speed.
6. Adjust RV651 of the AUDIO board so that the reading of the
frequency counter becomes 3000 ± 90 Hz.
Adjustment Location: AUDIO board
Sample Value of Wow and flutter
W.RMS (JIS) less than 0.3%
(test tape: WS-48B)
Playback Level Adjustment (Deck A, Deck B)
Procedure:
Mode: Playback
Deck A is RV311 (L-CH) and RV411 (R-CH), deck B is RV301
(L-CH) and RV401 (R-CH)
so that adjustment within the following adjustment level.
Adjustment level:
CN403 playback level: 301.5 to 338.3 mV (–8.2 to –7.2 dB)
level difference between the channels: within ± 0.5 dB
Adjustment Location: AUDIO board
L-CH
peak
R-CH
peak
screw
position
output
level
within
1 dB
L-CH
peak
R-CH
peak
screw
position
within 1dB
test tape
P-4-A100
(10kHz, –10dB)
oscilloscope
set
L
R
Waveform of oscilloscope
in phase
45
°
90
°
135
°
180
°
good
wrong
main board
CN403
Pin
3
(L-CH)
Pin
2
(GND)
Pin
1
(R-CH)
test tape
P-4-L300
(315Hz, 0dB)
level meter
set
main board
CN403
Pin
3
(L-CH)
Pin
1
(R-CH)
reverse
forward
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299