Sony HCD-SLK10D, Service Manual

Page: 27 / 94

HCD-SLK10D/SLK20D
27
DVD COLOR SYSTEM CHANGE (Except 120V AC area
in E, Mexican, Chilean, Peruvian and Brazilian models)
This mode let you change the color system of the video output
from PAL to NTSC or vice-versa.
Procedure:
1. Press the [
?/1
] button to turn on the system.
2. Touch the [HOME] sensor.
3. Touch the [
M
], [
m
], [
<
] and [
,
] sensors to select the “CD/
DVD”, and touch the [ENTER] sensor.
4. Press the [
?/1
] button to turn off the system.
5. Press two buttons of [VOL –] and [
?/1
] simultaneously.
6. The message “DVD COLOR NTSC” or “DVD COLOR PAL”
displayed on the liquid crystal display module and thus the
color system is changed.
TUNER STEP CHANGE (Except Saudi Arabian model)
The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
1. Press the [
?/1
] button to turn on the system.
2. Touch the [
M
], [
m
], [
<
] and [
,
] sensors to select the “Set-
tings”, and touch the [ENTER] sensor.
3. Touch the [
M
], [
m
], [
<
] and [
,
] sensors to select the “AM
Step Change”, and touch the [ENTER] sensor.
4. Touch the [
M
] and [
m
] sensors to select the “9kHz” or “10kHz”,
and touch the [ENTER] sensor.
5. The step interval of AM channels changed.
REMOTE DISABLE MODE
This mode disable the remote commander reception.
Procedure:
1. Press the [
?/1
] button to turn on the system.
2. Press two buttons [
x
] and [VOL +] and touch the [
m
] sensor
simultaneously.
3. The remote commander reception is invalidated (there is no
change in the display).
Releasing method:
Press two buttons [
x
] and [VOL +] and touch the [
m
] sensor si-
multaneously.
DVD SECTION
GENERAL DESCRIPTION
The IOP measurement allows you to make diagnosis and adjust-
ment simply by using the remote commander . The instructions,
diagnosis results, etc. are given on the on-screen display (OSD).
Be sure to execute the IOP measurement when a BU (Base Unit)
is replaced.
DVD SERVICE MODE
It changes to the DVD service mode. Remote commander is neces-
sary for the operation.
1. HOW TO ENTER THE DVD SERVICE MODE
Procedure:
1. Press the [
?/1
] button to turn on the system.
2. Touch the [HOME] sensor.
3. Touch the [
M
], [
m
], [
<
] and [
,
] sensors to select the “CD/
DVD”, and touch the [ENTER] sensor.
4 Press two buttons of [VOL +] and [
Z
] and touch the [
x
] sen-
sor simultaneously.
5. The DVD service mode starts.
The menu shown below will be displayed on the liquid crystal
display module.
Remocon Diagnosis Menu
0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information
Model Name
IF-con
: Ver. XX.XX (XXXX)
Syscon : Ver. X.XXX
: XXXXXXXX
6. The menu above is the Remocon Diagnosis Menu screen
which consists of fi ve main functions. At the bottom of the
menu screen, the model name, IF-con version and Syscon ver-
sion.
Releasing method:
Press the [
?/1
] button to turn off the system.
1-1. EXECUTING IOP MEASUREMENT
In order to execute IOP measurement, the following standard pro-
cedures must be followed.
Procedure:
1. Enter the DVD service mode.
2. Select “2. Drive Manual Operation” by pressing the [2] button
on the remote commander. The screen will appear as shown.
Drive Manual Operation
1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Tray Aging Mode
5. MIRR time Adjust
0. Return to Top Menu
3. Select “3. Manual Adjustment” by pressing the [3] button on
the remote commander. The screen will appear as shown.
Manual Adjust
1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq Boost Adjust:
6. Iop:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:
[
M
] [
m
] Change Value
[RETURN] Return to previous menu
4. Select “6. IOP” by pressing the [6] button on the remote com-
mander.