background image

SERVICE MANUAL

Sony Corporation

Published by Sony EMCS (Malaysia) PG Tec

CD/DVD RECEIVER

9-890-693-01

2018B80-1

© 

2018.02

AEP Model

HCD-M60D

Russian Model

E Model

Australian Model

HCD-M40D/M60D/M80D

Brazilian Model

HCD-M60D/M80D

Ver. 1.0  2018.02

•  HCD-M40D is the tuner, USB, DVD Player, Bluetooth and amplifi er section in MHC-M40D.
•  HCD-M60D is the tuner, USB, DVD Player, Bluetooth and amplifi er section in MHC-M60D.
•  HCD-M80D is the tuner, USB, DVD Player, Bluetooth and amplifi er section in MHC-M80D.

SPECIFICATIONS

DVD Section 

Model Name Using Similar Mechanism MHC-V50/V50D

DVD Mechanism Type

CDM90-DVBU204//C

Optical Pick-up Name

CMS-S76RFS7GP OR CMS-S76RFS7G1

Photo: HCD-M80D

Inputs

AUDIO IN (TV) L/R:
 

Voltage 2 V, impedance

 

47 kilohms

TV (ARC):
 

Supported audio signal:

 

2-channel Linear PCM

MIC1:
 

Sensitivity 1 mV, impedance

 

10 kilohms

MIC2/GUITAR:
 

Sensitivity 1 mV, impedance

 

 10 kilohms (When guitar mode is turned 
off.)

 

 Sensitivity 200 mV, impedance 
250 kilohms (When guitar mode is 
turned on.)

Outputs

HDMI OUT (TV) ARC:
 

Supported audio signal:

 

 2-channel Linear PCM (up to 
48 kHz), Dolby Digital

HDMI section

Connector:
 

Type A (19 pin)

Disc player section

System:
 

 Compact disc and digital audio and 
video system

Laser Diode Properties
 

Emission Duration: Continuous

 

Laser Output*: Less than 44.6 μW

 

* This output is the value measurement 

at a distance of 200 mm from the 
objective lens surface on the Optical 
Pick-up Block with 7 mm aperture.

Frequency response:
 

20 Hz – 20 kHz

Video color system format:
 

Latin American model:

 

NTSC

 

Other models:

 

NTSC and PAL

USB section

Supported USB device:
 

Mass Storage Class

Maximum current:
 

1 A

 (USB) port:

 

Type A

FM tuner section

FM stereo, FM superheterodyne tuner
Antenna:
 

FM lead antenna

Tuning range:
 

76 MHz - 108 MHz (100 kHz step)

 

(Brazilian model)

 

 87.5 MHz – 108.0 MHz (50 kHz step)

 

(except Brazilian model)

BLUETOOTH section

Communication system:
 

BLUETOOTH Standard version 4.2

Output:
 

BLUETOOTH Standard Power Class 2

Maximum output power:
 

< 9.5 dBm

Maximum communication range:
 

Line of sight approx. 10 m

*1

Maximum number of devices to be registered
 

8 devices

Maximum number of simultaneous connection 
(Multipoint)
 

3 devices

Frequency band:
 

2.4 GHz band (2.4000 GHz –

 

2.4835 GHz)

Modulation method:
 

 FHSS (Freq Hopping Spread Spectrum)

Compatible BLUETOOTH profiles

*2

:

 

 A2DP (Advanced Audio Distribution 
Profile)

 

 AVRCP (Audio Video Remote Control 
Profile)

 

SPP (Serial Port Profile)

Supported codecs:
 

SBC (Subband Codec)

 

AAC (Advanced Audio Coding)

 

LDAC

*1

  The actual range will vary depending on 

factors such as obstacles between devices, 
magnetic fields around a microwave oven, 
static electricity, reception sensitivity, 
antenna’s performance, operating system, 
software application, etc.

*2

  BLUETOOTH standard profiles indicate the 

purpose of BLUETOOTH communication 
between devices.

Supported audio formats

Supported bit rate and sampling frequencies:
 

MP3:

 

 32/44.1/48 kHz, 32 kbps  – 320 kbps 
(VBR)

 

AAC:

 

44.1 kHz, 48 kbps – 320 kbps

 

(CBR/VBR)

 

WMA:

 

44.1 kHz, 48 kbps – 192 kbps 

 

(CBR/VBR)

 

WAV:

 

44.1/48 kHz (16 bit)

– Continued on next page –

HCD-M40D/M60D/

M80D

Note:

Be sure to keep your PC used for service and 
checking of this unit always updated with the 
latest version of your anti-virus software.
In case a virus aff ected unit was found during 
service, contact your Service Headquarters. 

Summary of Contents for HCD-M40D

































Reviews: