35
HCD-M333
E-F Balance (1 Track jump) Check
Procedure:
1.
Connect an oscilloscope to TP (TE) and TP (DVC).
2.
Turn the power on.
3.
Load a disc (YEDS-18) and playback the number five track.
4.
Press the CD
u
button. (Becomes the 1track jump mode.)
5.
Confirm that the level B and A (DC voltage) on the oscilloscope
waveform.
Specification level:
x
100=less than
±
22%
Ajustment Location :
[BD (CD) BOARD] — SIDE A —
0V
Center of
waveform
B
Symmetry
A (DC voltage)
level=1.1
±
0.6Vp-p
A
B
CD SECTION
Note :
1. CD Block is basically designed to operate without adjustment.
Therefore, check each item in order given.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3. Use an oscilloscope with more than 10M
Ω
impedance.
4. Clean the object lens by an applicator with neutral detergent
when the signal level is low than specified value with the
following checks.
RF Level Check
Procedure :
1. Connect an oscilloscope to TP (RFAC) and TP (DVC).
2. Turn the power on.
3. Load a disc (YEDS-18) and playback the number five track.
4. Confirm that oscilloscope waveform is clear and check RF signal
level is correct or not.
Note:
Clear RF signal waveform means that the shape “
◊
” can be
clearly distinguished at the center of the waveform.
TP(RFAC)
TP(DVC)
BD (CD) BOARD
oscilloscope
VOLT/DIV : 200mV
TIME/DIV : 500ns
level : 1.1
±
0.3Vp-p
BD (CD) BOARD
Oscilloscope
TP (TE)
TP (DVC)
IC101
IC103
IC104
TP (DVC)
TP (TE)
TP (RFAC)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299