![background image](http://html.mh-extra.com/html/sony/hcd-m333/hcd-m333_service-manual_420800004.webp)
4
HCD-M333
This system has a Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made up
of three or five letters and a message alternately
to show you the problem. To solve the problem
refer to the following list. If any problem
persists, consult your nearest Sony dealer.
C11/Protected
The MD is protected against erasure.
c
Remove the MD and slide the tab to close the slot
(page 15).
C12/Cannot Copy
You tried to record a CD with a format that the
system does not support, such as a CD-ROM.
c
Remove the disc and turn off the system once,
then turn it on again.
C13/REC Error
Recording could not be performed properly.
c
Move the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does not
meet the standards.
Replace the MD and start recording over from the
beginning.
The MD deck cannot read the disc information
properly.
Remove the MD once, then insert it again.
The MD deck cannot read the disc information
properly.
c
Replace the MD.
c
Erase all the recorded contents of the MD using
the All Erase Function (page 29).
Self-diagnosis display
C41/Cannot Copy
The sound source is a copy of a commercially
available music software or CD-R.
c
The Serial Copy Management System prevents
making a digital copy (page 64). In addition, you
cannot copy from a CD-R.
C71/Check OPT-IN
No component is connected to the DIGITAL
OPTICAL IN jack, or you tried to record from th e
digital component which is not connected correctly.
c
Connect the optional digital component correctly
to the DIGITAL OPTICAL IN jack using the
digital optical cable (not supplied) (page 52).
The power of the connected component is not turned
on.
c
Check if the power of the connected digital
component is on. Refer to the operating
instructions supplied with the component.
The digital optical cable is disconnected, or the
power of the connected component is turned off
while recording the digital audio from the
component connected to the DIGITAL OPTICAL
IN jack.
c
Connect the digital optical cable, or turn on the
power of the connected component.
E0001/MEMORY NG
The component has internal problem.
c
Consult your nearest Sony dealer.
E0101/LASER NG
There is a problem with the laser pickup.
c
The laser pickup may be damaged. Consult your
nearest Sony dealer.
E0201/LOADING NG
There is a problem with loading.
c
Consult your nearest Sony dealer.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299