Sony HCD-LF1H, Service Manual, Page: 6 / 82

6
HCD-LF1H
• TO TAKE OUT DISC WHEN POWER SWITCH TURNS OFF (FORCE EJECT)
1. Load the disc using an external power supply.
4 claw
5
3 two claws
1 Remove the bottom seal.
2 three screws
2. If the loading motor is defective, disassemble the mech module (AUR-M1).
When re-assembling use
the new Bottom seal.
2
Remove the bottom seal.
3 Apply a DC voltage across LDM+ and LDM– on the board.
DC 2V to 3V (+)
(–)
1
Disconnect FFC 50P (160), and them remove the mech module (AUR-M1).
*
Please refer to SECTION 3 DISASSEMBLY (See page 11) for the method removed by the mech module (AUR-M1).
When re-assembling use
the new Bottom seal.
DC power
supply