10
Aging Mode
• Mode for repeating operations of the CD player and TC deck automatically.
When errors occur:
Aging stops and a message indicating that an error has occurred such as “CD MEC ERR” is displayed.
(For details of errors, refer to “Error History Display Mode”.)
When no errors occur:
Aging is repeatedly performed.
Procedure:
1. Load any CD and a tape.
2. Press the FUNCTION button and set the function to CD.
3. While pressing the PLAY MODE/DIRECTION/TUNING MODE button and ENTER/START button, press the
?
/
1
button.
4. “AGING” is displayed on the fluorescent display tube briefly.
5. When the aging mode is set, the CD mark and MD mark on the fluorescent tube CD of player and TC deck momentarily start aging.
6. Operations are performed in the following sequence during aging.
7.
To end aging, execute the cold reset.
Error History Display Mode
Mode for checking the history of errors which have occurred in the CD player.
Execute this mode after ending the aging mode.
Procedure:
1.
Press the FUNCTION button, and set the function to “CD”.
2.
While pressing the
s
button and FUNCTION button, press the
?
/
1
button.
3.
“EMC@@EDC**” id displayed.
@@ : Number of mechanism errors (Last 3 errors)
**
: Number of errors (NO DISC ERROR) which occurred after chucking (Last 3 errors)
4.
To check the history of mechanism errors, press the PLAY MODE/DIRECTION/TUNING MODE button, and to check BD errors,
press the REPEAT/DOLBY NR/STEREO/MONO button, and switch the display.
5.
To end, press the
1
/
u
button and turn OFF the power.
6.
To erase the error history, perform cold reset.
(While pressing the PLAY MODE/DIRECTION/TUNING MODE button and
A
MD button, press the
?
/
1
button.)
REW
(Shut off)
"TAPE AG-1
PLAY
FF
REV PLAY
REW
(2 min) "TAPE AG-2
(Shut off)
"TAPE AG-3
(2 min) "TAPE AG-4
(Shut off)
"TAPE AG-5
Reading of TOC
Playback of first track (3sec.)
Playback of last track (3sec.)
CD tray open
CD tray close
CD :
Cassette :
Summary of Contents for HCD-J3MD
Page 20: ...20 ...