![background image](http://html.mh-extra.com/html/sony/hcd-h331/hcd-h331_service-manual_420779005.webp)
– 5 –
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
CHUCK PLATE JIG ON REPAIRING
r
Tray (Slide) getting out procedure on the power supply is OFF
Rotate the BU CAM assembly in the direction of the arrow and pull out the slide.
Tray (Slied)
BU CAM assy
2
1
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-up
block. Therefore, when checking the laser diode emission, observe
more than 30 cm away from the objective lens.
On repairing CD section, playing a disc without the CD lid, use Chuck
Plate Jig.
r
Code number of Chuck Plate Jig : X-4918-255-1
Summary of Contents for HCD-H331
