![background image](http://html.mh-extra.com/html/sony/hcd-grx30/hcd-grx30_service-manual_420723004.webp)
— 4 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE WITH
MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
!
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
After correcting the original service problem, perform the
following safety checks before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage. Check leakage as
described below.
LEAKAGE
The AC leakage from any exposed metal part to earth ground
and from all exposed metal parts to any exposed metal part having
a return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1.
A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2.
A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3.
Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples of
a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2V AC range are suitable. (See
Fig. A)
SAFETY CHECK-OUT
To Exposed Metal
Parts on Set
0.15
µ
F
1.5 k
Ω
AC
Voltmeter
(0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
PART No.
MODEL IDENTIFICATION
– Back Panel –
MODEL
GRX30: E2, E3, EA, AR, SP, TW models
GRX30J models
R550, RXD5: CIS models
RXD5: US, CND models
R550, RXD5: AEP, AED, UK, G models
GRX30: MX, TH, KR, AUS models
PART No.
4-214-432-0
π
4-214-432-1
π
4-214-432-2
π
4-214-432-3
π
4-214-432-6
π
• Abbreviation
CND : Canadian model
AUS : Australian model
G
: German model
AED : North European model
EA
: Saudi Arabia model
E2
: Central and South America model
E3
: Middle and Near East model
MX
: Mexican model
SP
: Singapore model
TH
: Thai model
TW
: Taiwan model
AR
: Argentina model
KR
: Korea model
Summary of Contents for HCD-GRX30
Page 7: ... 7 This section is extracted from instruction manual ...
Page 33: ...HCD GRX30 GRX30J R550 RXD5 7 13 SCHEMATIC DIAGRAM MAIN SECTION 2 4 47 48 ...
Page 35: ...HCD GRX30 GRX30J R550 RXD5 7 15 SCHEMATIC DIAGRAM MAIN SECTION 4 4 51 52 32 768kHz 16MHz ...
Page 37: ...HCD GRX30 GRX30J R550 RXD5 7 17 SCHEMATIC DIAGRAM PANEL SECTION 55 56 ...