22
HCD-GN1100D
[CLEAR THE INITIALIZE SETUP DATA]
Press
[DVD MENU]
button and then press
[CLEAR]
button on the
remote commander.
Emg. History Check
Laser Hours
CD
999h
59min
DVD
999h
59min
Initialize setup data...
[Next]
Next Page
[Prev]
Prev Page
[0]
Return to top Menu
[VERSION INFORMATION CHECK]
Information of firmware version.
1. Enter DVD service Mode.
2. Select “4. Version Information” by pressing
[4]
button on the
remote commander. The screen will appears follows.
Version information
Firm (Main) : Ver. xxxxx
Firm (Sub) : xxxxx
RISC : xxxxx
8032 : xxxxx
Audio DSP : xxxxx
Servo DSP : xxxxx
[0]
Return to Top Menu
3. To return to the Top Menu of Remocon Diagnosis Menu, press
[0]
button on the remote commander.
[ERROR MESSAGE]
1. GC error message
• Display
Display on fluorescent indicator tube,
GC ERR01
When “GC ERR01” message appears, all LEDs lights up and
set becomes hang.
Set does not respond to any main unit keys or remote controller
keys.
•
What to do
1. Please check the model resistor value and replace with correct
parts.
2. Plug in the set. The error message shall not be appear.
Summary of Contents for HCD-GN1100D
Page 105: ...105 HCD GN1100D MEMO ...