![background image](http://html.mh-extra.com/html/sony/hcd-g101/hcd-g101_service-manual_420672009.webp)
— 9 —
Precaution
1. Clean the following parts with a denatured alcohol-moistened
swab:
record/playback heads
pinch rollers
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head demagne-
tizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the
parts adjusted.
5. The adjustments should be performed with the rated power sup-
ply voltage unless otherwise noted.
Torque Measurement
SECTION 3
MECHANICAL ADJUSTMENTS
SECTION 4
ELECTRICAL ADJUSTMENTS
DECK SECTION
0 dB=0.775V
1. Demagnetize the record/playback head with a head damagnetizer.
2. Do not use a magnetized screwdriver for the adjustments.
3. After the adjustments, apply suitable locking compound to the
parts adjusted.
4. The adjustments should be performed with the rated power sup-
ply voltage unless otherwise noted.
5. The adjustments should be performed in the order given in this
service manual. (As a general rule, playback circuit adjustment
should be completed before performing recording circuit
adjustment.)
6. The adjustments should be performed for both L-CH and R-
CH.
Used for
10 kHz, –10 dB
3 kHz, 0 dB
Azimuth Adjustment
Tape Speed Adjustment
Tape
P-4-A100
WS-48B
Signal
Record/Playback Head Azimuth Adjustment
(Deck A, Deck B)
Note: Perform this adjustments for both decks.
Procedure:
1. Mode : Playback
test tape
P-4-A100
(10kHz, –10dB)
set
SPEAKER
terminal (JK302)
level meter
+
–
FWD
FWD
back tension
1 to 5 g • cm
(0.01 - 0.07 oz • inch)
FF/REW
40 to 70 g • cm
(0.56 - 0.97 oz • inch)
Torque
Torque meter
Meter reading
CQ-102C
CQ-102C
CQ-201B
55 to 140 g • cm
(0.76 - 1.94 oz • inch)
Summary of Contents for HCD-G101
