Sony HAP-Z1ES, Help Manual

Page: 139 / 206

HDD AUDIO PLAYER
HAP-Z1ES
Operating a Sony amplifier using the remote control or dedicated application
If you register the remote control supplied with a connected Sony amplifier to the HDD AUDIO PLAYER, you can
perform operations such as turning on/off the amplifier, adjusting the volume and muting the sound through the remote
control supplied with the HDD AUDIO PLAYER or the HDD Audio Remote application.
1. Select [Settings] - [Amp Control Settings] in the Home screen.
2. Confirm the description about the AMP Control Settings, and then select [Next].
The current settings are displayed.
In use: a function to be used
Not in use: a function not to be used
3. Select [Next].
A screen to select the manufacturer of the connected amplifier appears.
4. Select [Sony].
A screen to confirm whether the amplifier has an IR In jack appears.
5. Select [Yes] or [No].
6. Select one of the connection methods below:
If there is an IR input jack on the amplifier, connect the IR REMOTE OUT jack of the HDD AUDIO PLAYER and
the IR input jack of the amplifier with the monaural mini-plug cable (supplied).
If there is no IR input jack on the amplifier, connect the plug of the supplied IR blaster (supplied) to the IR
REMOTE OUT jack of the HDD AUDIO PLAYER, and place the other side of the IR blaster (the side to radiate
infrared) close to the remote sensor of the amplifier.
7. Select [Next].
8. Select the remote code of the connected amplifier.
If you are using a Sony 2ch amplifier, select [2ch Amplifier].
If you are using a Sony AV amplifier, select [AV Receiver 1] or [AV Receiver 2] according to the remote code
configured for the AV amplifier.
If you do not know which remote code should be set for your AV amplifier, select [AV Receiver 2] at first and
confirm whether IR signal is output. If the AV amplifier does not work, select [AV Receiver 1]. Refer to the
operating manual of the AV amplifier for details.
Help Guide
How to Use
139